Removing Your Fridge 100-150-Ms/sMos-K/T | Elfin

For quotes & general enquiries call us today! +64 9 573 1444

Models – Fitted with Russell Hobbs Microwave/Combi Oven
B-100-Ms-K/T M-100-Ms-K/T E-100-Ms-K/T
B-100-sMos-K/T M-100-sMos-K/T E-100-sMos-K/T
M-150-Ms-K/T E-150-Ms-K/T
M-150-sMos-K/T E-150-sMos-K/T

Step 1.

Isolate the electrical supply to your Elfin Kitchen and unplug all appliances

Step 2.

Open the fridge door and look up towards the worktop you will find 1 screw going into the worktop, remove this screw and then close the fridge door.

Step 3.

To remove the microwave/combi oven begin by removing the 2 drawers from the bottom of the unit. Crouch down to the drawer space and look up towards the bottom of the microwave shelf where you will find 2 screws, remove the 2 screws and the microwave will come free. You may need to adjust the heat protector in the oven housing if the microwave gets caught.

Step 4.

Look upwards into the oven housing towards the fridge at the top, you will find 2 screws going into the fridge, remove these 2 screws.  Look inside the drawer housing towards the fridge at the very bottom, you will find a further 2-4 screws going in to the fridge, remove them all.

Step 5.

The fridge will now pull out from the front of the unit. Please note there is a hook on the back of the fridge, when the fridge is nearly out you may have to lift it slightly at an angle for the last 100mm. (Tip: lower the front feet on the fridge to aid removal)

Should you need to replace the fridge door skin remove all screws as instructed above.

Simply pull the fridge forward 40mm to expose the door pin on the extreme edge, remove the pin using Torx 20 and lift the door off.  Turn the fridge door upside down and remove the 2 screws, gently prize and lever the skin off the door.  Reverse this procedure to replace and then reverse the instructions above to replace the fridge.

If you have any further questions please call the Elfin Kitchens team on +64 9 573 1444